Technical Details Adjustable combined bearings
 |
|
|||||||||||||||||
DOWNLOAD TECHNICAL DETAILSDIMENSIONAL TOLERANCES, RADIAL CLEARANCE, LOAD CAPACITY
| Processing tolerance Precision class Radial clearance Load factors |
On DIN 620. P “O”. On DIN 620. Are calculated on DIN – ISO 281/1/ DIN – ISO 76. |
 |
Size
|
Load capacity | Weight Kg |
Section-type | |||||||||||||
|
TYPE |
d mm |
D mm |
H mm |
T mm |
L mm |
B mm |
A mm |
S mm |
r mm |
C KN |
C0 KN |
CA KN |
C0A KN |
||||
|
MR.146
|
30 | 62 | 43 | 42 | 33 | 20 | 5,5 | 16 | 3 | 31 | 35,5 | 8 | 8 | 0,56 | EC062 (2890) | ||
|
MR.147
|
35 | 70,1 | 48 | 48 | 40 | 23 | 6,5 | 16 | 4 | 45,5 | 51 | 8 | 8 | 0,85 | EC070 (2867) | ||
|
MR.148
|
40 | 77,7 | 50,5 | 54 | 39,5 | 23 | 7 | 21 | 4 | 48 | 56,8 | 14 | 14 | 1,02 | EC078 (2810) | ||
|
MR.149
|
40 | 78,1 | 45 | 54 | 34 | 23 | 7 | 21 | 4 | 48 | 56,8 | 14 | 14 | 0,92 | ET078 (3019) | ||
|
MR.150
|
45 | 88,4 | 61 | 59 | 48 | 30 | 7 | 21 | 3 | 68 | 72 | 15 | 15 | 1,70 | EC089 (2811) | ||
|
MR.151
|
50 | 101,9 | 50,5 | 67 | 37,5 | 28 | 7 | 21 | 3 | 73 | 82 | 18 | 19 | 1,85 | (2912) | ||
|
MR.142
|
60 | 107,7 | 69 | 71 | 55 | 31 | 8 | 33 | 5 | 81 | 95 | 31 | 36 | 2,80 | EC108 – (2862) | ||
|
MR.152
|
55 | 108,5 | 58,5 | 71 | 44,5 | 31 | 8 | 33 | 5 | 81 | 95 | 31 | 36 | 2,40 | ET108 (3100) | ||
| MR.153 | 60 | 123 | 75,8 | 80 | 59,5 | 37 | 8 | 33 | 5 | 110 | 132 | 31 | 36 | 4,08 | EC123 – FI123 (2891) | ||
| MR.154 | 60 | 149 | 89 | 103 | 69 | 43 | 15 | 50 | 5 | 151 | 192 | 68 | 71 | 6,70 | FI149 – EC149 (2757) | ||
|
The adjustment of the dimension “A” is made with rings shims inserted between the main support and the support ofguide bearing side. Ring are available for registration with thicknesses of 0.5, 1 mm. | |||||||||||||||||
